Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tram Pulley

To: towertalk@contesting.com, kb5urq@hotmail.com
Subject: Re: [TowerTalk] Tram Pulley
From: K7LXC@aol.com
Date: Wed, 24 Sep 2008 10:03:58 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 9/23/2008 5:25:51 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  I am looking for a pulley (available online?) that I could  use for a 
tram.  I'm going to use it to raise a couple of medium-sized  yagis up to the 
top 
of my tower.  I haven't been able to find much around  my house at the 
hardware stores and was hoping someone could make a good  suggestion based on 
their 
experiences.
 
    What you need is a steel snatch block; that is,  one that opens up so you 
can "snatch" the rope at any point instead of passing  the length of rope 
thru the pulley. I get mine from local rigging shops for  less than $20. 
They're 
Chinese but work fine. 
 
    The plastic pulleys from Champion Radio Products  are good for ropes but 
not steel; the sheave is too soft. 
 
Cheers& GL, 
Steve    K7LXC
TOWER TECH
and 
_www.championradio.com_ (http://www.championradio.com) 
 



 



**************Looking for simple solutions to your real-life financial 
challenges?  Check out WalletPop for the latest news and information, tips and 
calculators.      (http://www.walletpop.com/?NCID=emlcntuswall00000001)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>