A year or so ago I attended an estate sale for the station of W7BUD. I came
home with several yagis, some home built and some commercial. Each element
joint on these antennas was covered with a smooth covering of tape. I
assumed that this was to keep out moisture.
Yesterday I lowered a Mosley 2l 40 which was mounted above a 6l 20m ?Big
Stick? KLM. The 6l uses 3 truss wires on the 57 ft boom. I had considerable
trouble with the small bolts on the 40m snagging on the 20m truss wires.
When I got the 40 down, I sawed off the end of the bolts thru the joints to
help prevent this happening again. I suddenly realized that the taped joints
on BUD?s antennas were probably a solution to my snagging problem. Thinking
a bit more about this problem it seems that it would be wise to position
hose clamps so the screws are on top of the element and then tape them to
make a gradual bump at that point.
Maybe this is well known and used but in my 50 years as a ham I have never
encountered the technique before. Thanks Bud for a good idea.
73, Dan, N5AR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|