Bruce
Mosley uses SS metal screws to secure elements. I have had success in the past
by A: removing the screw and drilling out the hole .180. Using machine bolts
with drilled through holes when re assembling. As for elements seizes bt
electrosis, I have had success with Blaster or Krole Oil and prudent use of a
benzomatic hand help torch. YMMV
Gl Wayne W3EA
> From: k0son@frontiernet.net> To: towertalk@contesting.com> Date: Tue, 14 Oct
> 2008 19:25:36 -0500> Subject: [TowerTalk] Antenna Disassembly> > I want to
> clean up an old Mosley antenna that I had up for 20 years & then stored in
> the garage for almost as long. What is the best way to separate the tubing so
> the joints can be cleaned ? All are seized & I'm unable to separate them by
> hand. Don't want to use pipe wrenches. Will heat free them up, or is there a
> spray that will do the job ? Someone out there must have run into this before
> & has the best answer. Can you let me in on the secret?> > K0SON> Bruce>
> _______________________________________________> > > >
> _______________________________________________> TowerTalk mailing list>
> TowerTalk@contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
_________________________________________________________________
See how Windows Mobile brings your life together—at home, work, or on the go.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093182mrt/direct/01/
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|