Hi Roger and all
Thanks
This one was a pot metal one, you can see the seam on the sides, so I guess I
can be glad I had the idea of trying it on a little
above ground level before going up with it. It wouldn't even raise it off of
the ground.
One thing I didn't have was the pulley at the bottom and it was pulling at an
angle. From what I have read on the website sent to me
it can not be at an angle to pull and it needs to be close to the tower as
possible. None of those conditions were met either.
Guess there is more to it than I had thought.
Bob AD5VJ
> -----Original Message-----
> From: Roger (K8RI) [mailto:K8RI-on-TowerTalk@tm.net]
> Sent: Sunday, October 26, 2008 10:37 PM
> To: AD5VJ Bob
> Cc: towertalk@contesting.com
> Subject: Re: [TowerTalk] GENPOLE PULLEY
>
> AD5VJ Bob wrote:
> > Anyone try one of these yet?
> >
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290269531547It
> >
> "To me" it appears a bit on the light side as far as the pulley goes.
> > I just tried making a home made gen pole today and it wont
> even raise
> > my 35 lb three element tribander off of the ground so I am
> thinking of buying one of these and starting over.
> >
> > What size are gen-pole pulleys anyway? Mine was 1/2".
> > Looked like it would work great, but flopped.
> >
> Pulleys come in sizes (2") and rating (100# or 500# or what
> ever). The ones you find in most hardware stores and big box
> stores are good for maybe 40# to 60# unless otherwise noted.
> Good pulleys are not cheap.
> Even the hardware store pulleys rated at more than those pot
> metal ones are on the order of $40 - $50(give or take a bit)
>
> I've used make shift, temporary poles within the ratings of
> the parts that were nothing more than steel TV masting, a
> forged eye-bolt, and a 100# rated pulley. However I knew what
> I had and it's limitations.
> NOTE: be careful with eye-bolts. The regular non forged, non
> welded are soft and can easily open up, dropping what ever
> they were holding...like a pulley.
>
> Never put a side load on a ginpole. Put a second pulley at or
> near the base of the tower so the helper can pull the rope
> out away from the tower. It makes it easier to pull, but
> primarily it keeps the help out from under the work area
> where things might fall.
> If you've never worked with this kind of stuff, or climbing,
> find "at the least" some local hams who are familiar with the
> equipment, it's use, hazards, and good safety practices.
>
> 73
>
> Roger (K8RI)
> >
> > 73 fer nw es gud DX,
> > QSL VIA: LotW, BUR, e-QSL
> > Bob AD5VJ
> > http://www.ad5vj.com/
> > Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|