Gentlemen:
My guyed tower days are over, so I have the following useful
tower-related items available:
Set of three Klein "Haven" #1604-20L wire grips. Fit 1/8" to 1/2" guy
wire. Like new, used once when I put up my 45G tower in 2003. Load
capacity 5000 lb max, weight about 3 lb each. These sell for around
$60-$80 each depending on where you buy them. $125 for the set of three
shipped to your door anywhere in the lower 48. Photo here.
<http://www.flickr.com/photos/picker77/3004155404/>
Loos Professional Model PT-2 Guy Wire Tension Gauge. Fits 3/16", 7/32"
and 1/4" EHS. This gauge is also like new, with original box and
instructions. Avoids guesswork in guy tensioning. Simple operation, and
you can leave it in place and obtain constant readings while making
tension adjustments. Makes equalizing guy tensions a piece of cake. Loos
claims 3% accuracy. It has clearly marked scales for the three EHS sizes
listed above. This gauge retails for around $100 depending on source.
$75.00 shipped to your door anywhere in the lower 48. Photo here.
<http://www.flickr.com/photos/picker77/3004155398/>
Set of five IIX Mast Steps. 13" long, stout angle iron welded to 1/4
steel plates, heavily galvanized, Total weight for the five is 18 lb.
Complete with 10 each 2" zinc-coated muffler clamps supplied by IIX. IIX
sells these for $25 each (one step and two clamps). These are brand new
from IIX, never installed. $100.00 for the set of five shipped Fedex
Ground to your door anywhere in the lower 48. Photo here.
<http://www.flickr.com/photos/picker77/3004155388/>
PayPal, money order, whatever... Contact me via email off list. Thanks
for the bandwidth.
73 Jerry W5KP
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|