Towertalk
[Top] [All Lists]

Re: [TowerTalk] Topband: RFI

To: "'Wm. Freddy Curtis'" <curtisf@dtccom.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Topband: RFI
From: "Julio Peralta" <jperalta4@verizon.net>
Date: Wed, 31 Dec 2008 14:29:09 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
John try a line isolator. They can be purchased from several ham
manufactures. MFJ, The wireman and DX engineering are a few of the folks
that I know make them. I and a couple of my friends have been using the
Wireman version. I no longer have RFI in the shack.

The wireman has some suggestions in his website catalog on usage. BTW I used
to pop fuses in my Hy-Gain rotor controller when xmitting on 160 and 80 but
that has stopped since I installed the line chokes/isolators.

Julio, W4HY

-----Original Message-----
From: Wm. Freddy Curtis [mailto:curtisf@dtccom.net] 
Sent: Wednesday, December 31, 2008 12:59 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Topband: RFI

John,

I had a similar problem with the Yaesu G-450XL controller.  I had got an
Ameritron-811H Amp into an Inverted L 3 ft from tower.  I fried the
controller.  Got a used controller off of e-bay, however I forgot one
evening and fired up the amp and puff....  I bought a MDS Ham Controller
(about 1/2 the price of a Green Heron) and it has a JST connector.  I put
multiple chokes and ferrite beads in various locations on the rotor cable,
with three or four turns, Also got some snap-on chokes from Radio Shack with
multiple turns, but still have the RF. I purchased the toroids & beads from
Palomar Engineering.  I now simply keep the connector to the controller
unconnected when I'm on topband, it is easier now with the JST connector as
the Yaesu controller had the terminal strip on back.  The MDS Ham unit is
more "forgiving" about RF than the Yaesu controller.  

 

Also check out responses to my previous posts here on TT RE: Yaesu G-450XL
RF problems.  Hope this helps, and good luck!

 

73's,

Freddy Curtis - KC4GUG

 

 

 

-----Original Message-----

From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of John

Sent: Tuesday, December 30, 2008 12:48 PM

To: topband@contesting.com

Subject: Topband: RFI

 

Hi all,

 

Can anyone suggest a toroid and number of turns to choke out 160 meter QRO
from a Yaesu control cable? The RF on the cable's wires is not good for the
control box!

 

Thanks to all,

 

-John, N9RF

_______________________________________________

Topband mailing list

Topband@contesting.com

http://lists.contesting.com/mailman/listinfo/topband

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>