Towertalk
[Top] [All Lists]

Re: [TowerTalk] Toroid "Goop"

To: "RICHARD SOLOMON" <w1ksz@q.com>, "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Toroid "Goop"
From: "KB1H" <kb1h@ct.metrocast.net>
Reply-to: KB1H <kb1h@arrl.net>
Date: Tue, 13 Jan 2009 17:07:21 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have used the liquid grip you can buy at a NAPA Auto Parts store which is 
used to make grips on tools. Just dip the torrid is and voila!

Dick - KB1H
Visit "The Barnstormers Contest Group - NZ1U"
website http://www.qsl.net/kb1h/

24/7 Webcam Link on the website

Email KB1H@arrl.net   YCCC----> http://www.yccc.org/

KB1H DXSpider Node ------>  dxc.kb1h.com port 7300

2 Meter access on 144.930 Mhz.
----- Original Message ----- 
From: "RICHARD SOLOMON" <w1ksz@q.com>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Tuesday, January 13, 2009 2:48 PM
Subject: [TowerTalk] Toroid "Goop"


>
> I wound about 15 turns of RG-142 on a toroid and need some way
> to secure the winding. There is not enough room left in the ID to
> wind tape so I thought some liquid "stuff" might do the job. Just
> dip the toroid in and let it congeal !!
>
> Any recommendations ?
>
> 73, Dick, W1KSZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>