Towertalk
[Top] [All Lists]

Re: [TowerTalk] Parts fo A HAM II

To: "J. Wolfe" <JWolfe@progressivesystemsinc.org>
Subject: Re: [TowerTalk] Parts fo A HAM II
From: Tom Haavisto <kamham69@gmail.com>
Date: Thu, 12 Mar 2009 08:23:36 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Sounds like you had a larger antenna than this rotor was designed to
handle.  Take a look at a larger used rotor - say a Ham IV or
Tailtwister.  They are quite reasonable on the used market.

Tom - VE3CX




On Wed, Mar 11, 2009 at 7:53 PM, J. Wolfe
<JWolfe@progressivesystemsinc.org> wrote:
> I have an older rotator...a CDE HAM II..need the lower housing (Brake cogs 
> are toast) and the brake assembly itself.
>
> Any suggestions?
>
> Thanks in advance
>
> Joe Wolfe
> WA6RKN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>