Towertalk
[Top] [All Lists]

Re: [TowerTalk] roof mount Tripod

To: "W8HW" <w8hw@att.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] roof mount Tripod
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Date: Fri, 13 Mar 2009 17:43:29 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Bruce,

I use two 6' roof towers from IIX Engineering -- don't know if he still 
makes them, but they also have a rotator plate.  One holds my 5 el 10M yagi 
and my 2 el 20M Moxon -- uses a G-800S rotator.  The other holds my 7 el 6M 
yagi, my 11 el 2M FM yagi, and my 12 el 2M SSB yagi, with an old Alliance 
rotator.  Neither uses a thrust bearing, both have been fine for 5+ years. 
Check out my web site for pictures.

73,
______________________________

Larry Banks   FN42kl     W1DYJ
Amateur Extra                  ARRL
        WAS    WAC    VUCC
        QCWA  1010  SMIRK
MMRA         N.E.W.S.       MARA
larryb@alum.mit.edu
http://www.qsl.net/w1dyj/
______________________________



----- Original Message ----- 
From: "Steve Katz" <stevek@jmr.com>
To: "W8HW" <w8hw@att.net>; <towertalk@contesting.com>
Sent: Friday, March 13, 2009 4:48 PM
Subject: Re: [TowerTalk] roof mount Tripod


> Glenn Martin Engineering (GME) sells four-legged roof towers from "very 
> short" to quite tall.  They are all made of extruded aluminum and easy to 
> assemble but very strong.  They all have a "rotator plate" in them, as 
> part of the standard design.  The plate accommodates Hy-Gain and Yaesu 
> rotators (all bell housing designs) and mounts inside the roof towers, 
> even their shortest one.  They all have an upper bracket directly above 
> the rotator mount where a thrust bearing can be installed, and they sell 
> the bearings as well.
>
> I've used several of these over many years at different locations, and 
> they're good.
>
> WB2WIK/6
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of W8HW
> Sent: Friday, March 13, 2009 1:33 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] roof mount Tripod
>
>
> Has anyone ever tried to mount a Rotor with a  ratable antenna on a roof 
> mount Tripod? If so, how did you Mount rotor and thrust Bering? What type 
> of tripod did you buy?
>
> thanks, Bruce, W8HW
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>