Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mast Sizing

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Mast Sizing
From: "Jorge Diez - CX6VM" <cx6vm.jorge@adinet.com.uy>
Date: Wed, 13 May 2009 10:33:51 -0300
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
John,

Try the MARC software. http://www.championradio.com/misc.html

This is very easy to use, you can add the antennas setup you want to
calculate the mast and rotor needed.

73,
Jorge
CX6VM/CW5W


-----Mensaje original-----
De: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] En nombre de John Kemker
Enviado el: Miércoles, 13 de Mayo de 2009 02:36 a.m.
Para: towertalk@contesting.com
Asunto: [TowerTalk] Mast Sizing

Are there any guidelines for sizing masts and wall-thickness based upon how
long and how much weight will be put on them?

I've got a Mosley CL-33M (42 lbs. 6.0 sq. ft.), and a Cushcraft A50-5S
(11 lbs. 2.9 sq. ft.) I'll be putting on a 50ft. tower this summer.  I'd
like to determine what sort of steel mast to use.  I'm figuring about a 15ft
to 16ft. mast with the CL-33M 1 ft. above the tower and the A50-5S near the
top of the mast.

I'm not afraid to use a formula to size the mast.  In fact, that's part of
the fun!

--
--JohnK
73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/TRA 2499/Norcross 228 F&AM




---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 090512-0, 05/12/2009
Tested on: 5/13/2009 1:35:48 AM
avast! - copyright (c) 1988-2009 ALWIL Software.
http://www.avast.com



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>