K4SAV wrote:
> N6RK wrote: "I spent a lot of time analyzing the balun in my MonstIR and
> characterizing it on a network analyzer."
>
> I have always wondered how well that thing worked. They use half of the
> core for a voltage balun and they use the other half for a choke by
> winding a few turns of the coax thru it. What does your measurements
> tell you about how well the common mode choke works?
>
> Jerry, K4SAV
I didn't measure it as a common mode choke because I thought it was
a voltage balun. The fact that the coax is one of the windings
does not necessarily indicate that it is a common mode choke.
Rick N6RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|