Towertalk
[Top] [All Lists]

Re: [TowerTalk] 25g taper tops

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 25g taper tops
From: N7KA@comcast.net
Date: Fri, 17 Jul 2009 21:54:09 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Oct 1978 Rohn Catalog: Drawing No. C-630625-R6  Revision date 5-12-78 



25 AG       9ft 0 inches long; 2.00 od 16 ga tubular extending 9 inches above 
the legs. 

25AG-1    9ft 4.5 inches long; 2.00 od 16ga tubular extending 12 inches above 
the legs. 

25 AG-2    9ft 10.5 inches long; 2.25 od 14ga tubular extending 18 inches above 
the legs. 

25 AG-3    9ft 4.5 inches long; 2.25 od 14ga tubular extending 12 inches above 
the legs. 

25 AG-5    8ft 5.5 inches long; 2.75 od 14ga tubular extending 1 inch above the 
legs. 



Arne N7KA 


----- Original Message ----- 
From: "jim Jarvis" <jimjarvis@optonline.net> 
To: towertalk@contesting.com 
Sent: Friday, July 17, 2009 5:11:20 PM GMT +00:00 Monrovia 
Subject: [TowerTalk] 25g taper tops 


I've had 25g taper tops with 2" i.d. (approx) tubes,  and with 1.75"   
i.d. 
As far as I knew, they were both from Rohn. 

Are we saying that Rohn only made 2" tube tops? 

n2ea 
_______________________________________________ 



_______________________________________________ 
TowerTalk mailing list 
TowerTalk@contesting.com 
http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>