Towertalk
[Top] [All Lists]

Re: [TowerTalk] EHS vs Phillystran

To: <Cqtestk4xs@aol.com>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] EHS vs Phillystran
From: "EZ Rhino" <EZRhino@fastmovers.biz>
Date: Mon, 31 Aug 2009 13:23:20 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Define "large quantities"?  I assume you mean more than needed for a top set
of guys, or even one entire tower?

Chris
KF7P




----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <TOWERTALK@contesting.com>
Sent: Monday, August 31, 2009 11:54 AM
Subject: Re: [TowerTalk] EHS vs Phillystran


>
> In a message dated 8/31/2009 5:50:02 PM Greenwich Standard Time,
> n1bnc@yahoo.com writes:
>
> Is there  something else other than phillystran out there that has the
same
> electrical  properties but with less cost?
>
>
> Yes, there is....Polyrod.  It is extruded fiberglass rod used  by
broadcast
> stations and power companies.  It is much stiffer than Philly  and is not
> coated.  The price is around 1/3 to 1/2 that of euqivalent  Philly.
Drawback
> : it must be ordered in large quantities, and you must  wear gloves since
it
> is uncoated.
>
> >From time to time guys on towertalk have put together big orders  for
this
> stuff.
>
> Bill KH7XS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>