In a message dated 9/2/2009 12:02:26 P.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> I use the LOOS Model PT-2 for Tension adjustments. Is the PT-2 good
for Phillystran also ?
The only one you can actually measure directly is the HPTG4000. The
jacket of Phillystran makes it oversized compared to steel guys so the
problem is getting the little gate on the Loos to accept it. Other Phillystran
sizes cannot be measured directly. Since you should be using steel guys from
the end of the Phillystran to the anchor anyway, you can measure the steel
guy with no problem.
Cheers,
Steve K7LXC
TOWER TECH
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|