5-1/2" on my AN Wireless tower
73, Glenn/KD0Q
----- Original Message -----
From: "Steve Maki" <lists@oakcom.org>
To: "towertalk" <towertalk@contesting.com>
Sent: Wednesday, September 16, 2009 7:40 AM
Subject: Re: [TowerTalk] fall arrestor
Pete,
The standoff brackets on commercial safety line systems generally hold
the wire 4" or 5" from the tower leg.
73,
Steve K8LX
pete sias wrote:
> What are the general thoughts on spacing distance from a tower leg
> for a 3/8" fall arrestor cable ? I have a triangle tower with angle
> iron legs and climbing pegs. My harness has a D ring at mid chest
> location for the arrestor mechanism. Before I finish making the top
> stand off bracket I thought I would get some advice so as to get it
> right the first time.....
>
> Tnx, NØOY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|