Steel, but just for the splice - you've seen that, right? Like a
"stiffener".
-K1HI-
Rex Lint, Consultant
26 Brek Drive
Merrimack, NH 03054
PH: 603-860-7651
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com
Sent: Wednesday, September 23, 2009 6:52 PM
To: towertalk@contesting.com; singlesideband@yahoo.com
Subject: Re: [TowerTalk] Booms
In a message dated 9/23/2009 5:25:52 A.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> To the Ham wanting three inch boom materials .
Have you thought about 3' rigid emt conduit? The heavy gage?
Is that steel or aluminum? There's a reason why amateur antennas are
made from aluminum.
Cheers,
Steve K7LXC
UP THE TOWER -
The Complete Guide To Tower Construction
_www.championradio.com_ (http://www.championradio.com)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|