Jim Brown wrote:
> On Fri, 16 Oct 2009 22:59:44 -0400, Roger (K8RI) wrote:
>
>
>> Not being the patient type I'd expect the dealer or factory to fix it.
>> If not promptly addressed they'd find in on the loading doc some
>> morning.
>>
>
> I strongly agree. Many modern appliances are being sold with
> electronically controlled variable speed motor drives. These units are
> NOTORIOUSLY BAD RFI generators. Tell your dealer to either fix it or
> replace it, and make it clear that it's on HIS nickel, not yours. This
> product violates Part 15 of the FCC rules.
>
Unfortunately...those devices are exempt from part 15 IIRC.
73
Roger (K8RI)
> BTW -- I'm just working my way through Henry Ott's new book on EMC. It
> includes specific advice for these variable speed drives. 1) Run a
> dedicated equipment ground conductor between the controller and the
> motor, following PRECISELY the same route as the current-carrying
> conductors, and in VERY close proximity to them. This forms a
> transmission line for the noise, providing a return path that has a very
> small loop area. 2) Add a good power line filter between controller and
> the power line, carefully bonding the ground of the filter to the ground
> of the controller with a ZERO LENGTH wire. This is a two-step process,
> and you need both steps. #1 is probably the most critical, but both are
> important.
>
> A third step that also helps must be done by the motor/controller
> designer -- add a ferrite bead and small bypass capacitor to the gate of
> the switching elements to slow down the rise time a bit, which reduces
> the high order harmonics of the square waves that drive the motor.
>
> 73,
>
> Jim Brown K9YC
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|