Towertalk
[Top] [All Lists]

Re: [TowerTalk] Concrete base spec info requested

To: "'Ray'" <rayn6vr@cableone.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Concrete base spec info requested
From: "Tod - ID" <tod@k0to.us>
Date: Sun, 25 Oct 2009 19:58:22 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 My foundation was poured with 4000 psi. Did not cost extra -- it is the
standard mix locally.

Tod, KØTO



> -----Original Message-----
> From: towertalk-bounces@contesting.com 
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Ray
> Sent: Sunday, October 25, 2009 7:33 PM
> To: towertalk@contesting.com
> Cc: Skip. KJ6Y; Hector, XE2K
> Subject: [TowerTalk] Concrete base spec info requested
> 
> I am pouring two tower bases on Tuesday. I am looking for 
> some general info on the concreted needed for the bases. The 
> towers are older, US Tower - MA770 and a Tristao - CZ 471. 
> Both engineering details (1999 and 1977) state the concrete 
> Fc is 2000 lbs. I think this means the compressive strength 
> of the concrete. I thought the typical strength is 2500 lbs, 
> and if I remember correctly, on another 70 ft tower I poured 
> 30 years ago, I used 3500 lbs strength.
>  
> Can anyone tell me if I should be using 2000 lbs concrete? 
> And are there any other additives that should or could be used? 
>  
> Ray,
> N6VR
>  
> (Near Prescott, AZ)
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>