Towertalk
[Top] [All Lists]

Re: [TowerTalk] Splicing and weatherproofing ladder line

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Splicing and weatherproofing ladder line
From: KI9A@aol.com
Date: Fri, 25 Dec 2009 19:07:43 EST
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mine has been spliced, and uncovered since 1998. Looks great, works  great. 
 Any kind of tape, ect., will break down FAR quicker than  solder.
 
73- Chuck KI9A
 
 
In a message dated 12/25/2009 6:04:41 P.M. Central Standard Time,  
EZRhino@fastmovers.biz writes:

I  thought I read somewhere that solder breaks down from the UV   
light.  Taping it up or some liquid electrical tape should do the  trick.

Chris
KF7P



On Dec 25, 2009, at 15:22 , John  Kemker wrote:

Y'know, I would have though the solder itself would act  as a
weatherproofing, as a proper solder joint is supposed to be  mechanically
sound, first, then the solder surrounds the joint  with
lead/tin/silver/whatever, providing an encapsulated joint that should  be
protected from the elements.  Once you've soldered, a little bit  of
liquid electrical tape or just plain electrical tape should do the  job.

--JohnK
73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/Six  Club 285/TRA 2499/Norcross 228 F&AM



Wes Attaway (N5WA)  wrote:
> Twist the wires together over about a 1-inch length.   Solder the  
> connection
> and massage some coax-seal around  the joints.
>
> ------------------ Wes Attaway (N5WA)  ------------------
> 1138 Waters Edge Circle - Shreveport, LA  71106
>     318-797-4972 (office) - 318-393-3289  (cell)
>         Computer Consulting and  Forensics
> -------------- EnCase Certified Examiner  ---------------
>
>
> -----Original Message-----
>  From: towertalk-bounces@contesting.com
>  [mailto:towertalk-bounces@contesting.com] On Behalf Of anthony
> Sent:  Friday, December 25, 2009 11:44 AM
> To:  towertalk@contesting.com
> Subject: [TowerTalk] Splicing and  weatherproofing ladder line
>
> Merry christmas to  everyone.
>
> I need some advice. Im lengthining my 450 ohm ladder  line, The  
> splice will
> be outside in the elements. What  would be the best way to totally  
> weather
> proof the  connection. I was thinking a few coats of scotchcoat and  
> then  some
> GE clear silicone. Any help would be apreciated. thanks fellow  hams.
>
> tony k2vi
>  _______________________________________________
>
>
>
>  _______________________________________________
> TowerTalk mailing  list
> TowerTalk@contesting.com
>  http://lists.contesting.com/mailman/listinfo/towertalk
>
>  _______________________________________________
>
>
>
>  _______________________________________________
> TowerTalk mailing  list
> TowerTalk@contesting.com
>  http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>