Just about every antenna wire that ever broke here was at a soldered
connection. Finally quit soldering and just wrap and tape. 73
Tom W7WHY
>
>
> Bill K2OWR wrote:
>> :::: You were not crimping the lug?
>> I would crimp it AND solder it.
>>
> Solder mechanically weakens it in a crimp although it helps in weather.
> In aviation wiring, we are not allowed to solder a crimped connector.
> With the vibration/movement the wire will almost inevitably break at the
> wire/solder interface.
>
> If the need to solder is felt make sure to bend the wire in an "S" shape
> between the solder and the the other end of the "S" as others have
> already mentioned.
>
> 73
>
> Roger (K8RI)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|