Towertalk
[Top] [All Lists]

Re: [TowerTalk] Plugs G-800

To: <nf4l@nf4l.com>, "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Plugs G-800
From: "Hans Oortman" <pa3arw@euronet.nl>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Wed, 27 Jan 2010 13:09:17 +0100
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
To the best of my knowledge these are not replacement plugs but the normal
Yaesu plugs as you can purchase them at your local Yaesu dealer.

Wimo is a great company though.

Hans Oortman
PA3ARW

-----Oorspronkelijk bericht-----
Van: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] Namens Mike
Verzonden: woensdag 27 januari 2010 12:22
Aan: Tower and HF antenna construction topics.
Onderwerp: Re: [TowerTalk] Plugs G-800

Click on Rotator accessories (on the left), and scroll down.

73, Mike NF4L

Dennis Vernacchia wrote:
> Larry,
>
> That link took me ot main web site but where are the Yaesu Rotator
> connectors ?
>
> 73, Dennis N6KI
>
> On Tue, Jan 26, 2010 at 8:57 PM, Larry K4AB <larry.k4ab@gmail.com> wrote:
>
>   
>> Use this link:  ..
>> http://www.wimo.com/cgi-bin/verteiler.pl?url=yaesu-rotator_e.html
>>
>> The plugs are EXACT Yaesu replacements for the control box and the rotor
>> unit.
>> And, they cost less, as well, and ship quickly.
>>
>> 73,
>> Larry K4AB
>>
>>
>>
>>
>> On Tue, Jan 26, 2010 at 10:05 PM, larryjspammenot@teleport.com <
>> larryj@teleport.com> wrote:
>>
>>     
>>> I, too, need one of the plugs for my Yaesu G800DXA rotator (the rotor
>>>       
>> end,
>>     
>>> not the controller). When you order a plug for it, does it come with any
>>> kind of "boot" or other weatherproofing system to keep water out of the
>>> contacts? Or do you just have to apply lots of "Coax-Seal" or some other
>>> similar material all over it and hope for the best?
>>>
>>> LJ
>>>
>>>
>>> -----Original Message-----
>>>       
>>>> From: Perry - K4PWO <k4pwo@comcast.net>
>>>> Sent: Jan 26, 2010 7:25 PM
>>>> To: "Tower and HF antenna construction topics." <
>>>>         
>> towertalk@contesting.com
>>     
>>>> Subject: Re: [TowerTalk] Plugs G-800
>>>>
>>>> R&L Electronics has the NJC-207-PF connectors for $20 each.
>>>> See... http://www.randl.com/cgi-local/cart/cart.cgi?cart=ai&ID=39808
>>>>
>>>> 73 de Perry - K4PWO
>>>>
>>>> --------------------------------------------------
>>>> From: "Terrence R. Redding Ph.D." <terry@oltraining.com>
>>>> Sent: Tuesday, January 26, 2010 06:49 AM
>>>> To: <towertalk@contesting.com>
>>>> Subject: Re: [TowerTalk] Plugs G-800
>>>>
>>>>         
>>>>> Jim, thanks for the comment.
>>>>>
>>>>> Yes, the new rotor motors ship with the seven pin male connector on
>>>>>           
>> the
>>     
>>>>> motor.  The older motor has a larger six pin plug.
>>>>>
>>>>> I am looking for a source of both.  If none are known, then I will
>>>>>           
>> call
>>     
>>>>> Yaesu.
>>>>>
>>>>> Terry - W6LMJ
>>>>>
>>>>>
>>>>> On 1/26/10 1:58 AM, "towertalk-request@contesting.com"
>>>>> <towertalk-request@contesting.com> wrote:
>>>>>
>>>>>           
>>>>>> On Tue, 26 Jan 2010 00:14:05 -0500, Terrence R. Redding Ph.D. wrote:
>>>>>>
>>>>>>             
>>>>>>> I am wondering if there is a source for the six pin and seven
>>>>>>> pin female connectors that attach at the rotor motor end of the
>>>>>>> rotor control cable?
>>>>>>>               
>>>>>> I'm looking at schematic in the Yaesu manual for the rotor I bought
>>>>>> new this summer. The part numbr for the connector attached to the
>>>>>> rotor is NJC-207-RW. The cable-mounted connector that mates with it
>>>>>> is NJC-207-PF. At the time, I looked at the connectors and decided
>>>>>> that they were Japanese parts, but I did not recognize a mfr.
>>>>>>
>>>>>> The same manual also includes schematics for the G-2800DXA. The
>>>>>> corresponding connectors for that rotor are designated NJW-207-RW
>>>>>> and NJW-207-PF. I've not seen a G-2800DXA, so don't know the
>>>>>> difference between the connectors.
>>>>>>
>>>>>> The connectors for both rotors are 7-pin connectors.
>>>>>>
>>>>>> 73,
>>>>>>
>>>>>> Jim K9YC
>>>>>>             
>>>>> _______________________________________________
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> TowerTalk mailing list
>>>>> TowerTalk@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>>>
>>>>>           
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>>         
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>       
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>     
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>