Re: [TowerTalk] Rotator loops

["Tony Brock-Fisher" <barockteer@aol.com>]

Pete-

That's what I use at the transition at the flat top of my Rohn 45. Essentially 
it's a one-turn loop around the mast before being secured to the mast. Out of 
concern for chafing against the top plate or thrust bearing, I add an outer 
layer of plastic wire loom on the coax. Hopefully that will prevent the coax 
jacket from chafing thru...

-Tony, K1KP
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk