I have the CZ-471. Tristao made a nice diagram of the plywood template that
you laid on top of the forms. I do not have the 454 diagram so maybe Tony
can send or e-mail it to you.
Make sure you have threads on the top of each 3' mounting rod. The bottom
flanges bolt to the rods.
I have moved the tower four times and Lou Tristao
said for me to get galvanized 1" universal bolt. You need the HD version
usually available form a bolt and screw warehouse. I got a local hardware
store to order the rods for me. I cut them off at 48" the last time with
the final 12" bent at a foundry. These are still in my base now since 1979
at this location.
The original rods were black steel with a bend for the last 6" Lou advised
that was Ok for the 54 foot tower but he was recommending 12" for my 71
Good luck with the tower its a nice one.
TowerTalk mailing list