On Apr 9, 2010, at 9:33 PM, Steve Maki wrote:
> John,
>
> VXL7 cable needs "V7" connectors. The various Heliax cables have
> different center conductor diameters because of the different
> dielectric
> properties. I believe I have some V7 connectors if you need them.
>
> For ham use there is no functional difference between LDF7, AVA7, and
> VXL7 coax - whatever you can get for a good price and get connectors
> for.
>
> I have a fair amount LDF7 and AVA7 in stock at a good price, with lots
> of 7/16 DIN female connectors, and a few N connectors...Detroit area.
>
> -Steve K8LX
>
>
> john@kk9a.com wrote:
>> I am very familiar with Andrew LDF7-50A 1 5/8 Heliax, but often I
>> see other
>> model cables such as VXL7-50, for a reasonable price. The specs seem
>> similar, except there's mention of it being flexible. Is anyone
>> familiar
>> with VXL-50? Do the LDF7-50A connectors fit or are special
>> connectors
>> needed and are there any disadvantages to using the cable? Any
>> comments are
>> appreciated.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|