I have three self supporting tower sections of unknown make. They're
made of galvanized steel rod, zig-zag bracing (bent & welded to the
legs at the curves). The zig-zags do not have any purely horizontal
sections, they're all at shallow angles relative to level going leg to
leg, which makes these sections a pain to climb/work on. The sections
are 20' tall, and have square feet on each end with a 4 bolt hole
pattern for connecting to the next section. Each section has "VS2"
stamped in the bottom of one foot plate. The weight of each is ~130
pounds.
I can provide photos if that would help. I've searched the web and
can't find who the manufacturer is. They look like Rohn SSV but I've
found no matches with any SSV & "VS2" so far. I'd really like to find
a mating bottom section in order to have a 40' tower. Any clues are
appreciated.
--
Thanks,
Robin Midgett K4IDC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|