http://www.tennadyne.com/slipp_nott.htm
They claim it will work with most boom to mast plates.
73,
Joe kk0sd
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Pete Raymond
Sent: Wednesday, May 26, 2010 1:36 PM
To: (N0AH) Bryon "Paul" Veal; towertalk@contesting.com
Subject: Re: [TowerTalk] Beefing Cushcraft D40 mast clamps-
Hi Paul, I am about to change mine out because in about a years time they
are rusting. I plan on using the heavy duty U-bolt and saddles available
from DXEngineering.
73 Pete N4KW
----- Original Message -----
From: "(N0AH) Bryon "Paul" Veal" <bryonveal@msn.com>
To: <towertalk@contesting.com>
Sent: Tuesday, May 25, 2010 4:00 PM
Subject: [TowerTalk] Beefing Cushcraft D40 mast clamps-
> Here in south Denver yesterday, we got 60-70 MPH winds- a number of us
> experienced problems from broken rotors to downed verticals. My only
> problem was my Cushcraft 40M RTD spun about 10 degrees on the mast- not
> too much to complain about but has any one modified mast mounting brackets
> on one of these class of antennas to beef up the grip on the mast? I'm
> concerned if I tighten up the U-bolts much more, I stand to crack them-
> any suggestions welcomed- you can see the D-40 manual at the MFJ/Cushcraft
> site for more details- Lot's of possibilities to screw things up, hi
>
> 73 Paul N0AH
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|