Towertalk
[Top] [All Lists]

Re: [TowerTalk] Grounding on a rock hilltop

To: scottw3tx@verizon.net
Subject: Re: [TowerTalk] Grounding on a rock hilltop
From: Eric Scace K3NA <eric@k3na.org>
Reply-to: eric@k3na.org
Date: Mon, 19 Jul 2010 23:57:03 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Commercial sites run out a ground screen, typically long 'radials' of 
strap or wire.  They are anchored to the rock occasionally simply to 
keep them in place.  They form the top of a big capacitor, with the rock 
as a lossy dielectric.  Everything is referenced to this ground screen.

on 2010 Jul 19 23:11 scottw3tx@verizon.net said the following:
> I'm working on a friends' station this week, which is on the top of a very
> high hill (the hill-top is about 100ft above the terrain for 270 degrees of
> azimuth).
>
> Naturally, the hill is solid rock (the tower foundation was blasted).  There
> is from no to perhaps 2 inches of soil covering the rock.
>
> I'm interested in hearing what has worked to improve station grounding in
> similar situations.
>
> 73,
> Scott W3TX
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>    
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>