Here is a site that provides info on the marking used on HAM-M type rotors
http://www.rotorservice.com/serv3%20identify.htm
I seem to remember there were some wiring changes prior to the series 4.
Arne N7KA
----- "Joe Subich, W4TV" <lists@subich.com> wrote:
> Those numbers are 5 604 (space between the 5 and 604) and are the only
> thing on the base.There is nothing on the outside of the base cover
> which is the brake and nothing on the bell.
Then it's a HAM-V (Ham 5). Updated HAM IV IIRC, the full "decode" is
HAM 5 manufactured June 2004.
73,
... Joe, W4TV
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|