To: | towertalk@contesting.com |
---|---|
Subject: | [TowerTalk] wall plate jack for the 8 wire rotor cable |
From: | "Kurt Cathcart, KR2C" <Kurt@KuhlRoad.Net> |
Date: | Wed, 03 Nov 2010 12:27:21 -0400 |
List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> |
Currently I have my Hy-gain rotor cable coming through a hole in a stainless steel wall plate with a grommet. I have wound up on the floor a bunch of excess cable before it goes to the control box. Does anybody make a good connector that I could mount in the wall plate so that I can use a shorter jumper cable from the wall to the control box? this way I wouldn't have to worry too much if I should re-arrange the shack. -Kurt KR2C _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] YAESU Rotor Connectors, Tom-W3FRG |
---|---|
Next by Date: | Re: [TowerTalk] wall plate jack for the 8 wire rotor cable, n8de |
Previous by Thread: | [TowerTalk] YAESU Rotor Connectors, Tom-W3FRG |
Next by Thread: | Re: [TowerTalk] wall plate jack for the 8 wire rotor cable, n8de |
Indexes: | [Date] [Thread] [Top] [All Lists] |