Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: Upside down rotor

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Fwd: Upside down rotor
From: "john@kk9a.com" <kk9a@bellsouth.net>
Reply-to: john@kk9a.com
Date: Mon, 15 Nov 2010 04:38:43 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I think that it would work, but the rotation indicator would be off.  Can't you 
mount it right side up?

John KK9A


To:  'Towertalk' <towertalk@contesting.com> 
Subject:  Re: [TowerTalk] Fwd: Upside down rotor 
From:  Phil Snyder <n9lah@comcast.net> 
Date:  Sun, 14 Nov 2010 19:26:17 -0600 


Thank you Hans. Yours is the first response. I had just about decided 
that I had finally stumped the Tower Talk reflector. I guess my concern 
was whether or not the races that the bearings were sandwiched between 
were tight enough for the downward force.

Phil
N9LAH

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] Fwd: Upside down rotor, john@kk9a.com <=