Towertalk
[Top] [All Lists]

Re: [TowerTalk] compression PL259

To: <n8de@thepoint.net>, "DJ7WW" <dj7ww@t-online.de>
Subject: Re: [TowerTalk] compression PL259
From: "Kevin Adam" <n9iww@msn.com>
Reply-to: Kevin Adam <n9iww@msn.com>
Date: Sat, 22 Jan 2011 23:02:31 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you all would use Rosin flux the damages would stop due to over heating. 
rosin stop the oxidation from happening. with coax at $ 1 foot and 
coneectors At $2 plus each that get expensive so That why I went back to 
using flux prevents this happening.
N9IWW

-----Original Message----- 
From: n8de@thepoint.net
Sent: Saturday, January 22, 2011 3:35 PM
To: DJ7WW
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] compression PL259

The secret seems to be :  putting sufficient flux on the braid and
connector so the heat is distributed quickly and well.

Too much heat is worse than too little, as it is destructive and noted
by K4JRB.

73
Don
N8DE


Quoting DJ7WW <dj7ww@t-online.de>:

> I always solder PL259 plugs with my old Weller TCP 50W iron and never had
> any problem
>
> 73
> Peter
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of David Thompson
> Sent: Samstag, 22. Januar 2011 19:47
> To: Rob Atkinson; towertalk@contesting.com
> Subject: Re: [TowerTalk] compression PL259
>
> Because a Weller 100 watt gun usually melts the coax before the connector
> gets hot enough to work.  I have a 230 watt dual gun and usually about 50%
> of the time the connector is soldered
> and the other 50% means you throw the connector away.
> Dave K4JRB
>
> ----- Original Message -----
> From: "Rob Atkinson" <ranchorobbo@gmail.com>
> To: <towertalk@contesting.com>
> Sent: Friday, January 21, 2011 1:03 PM
> Subject: Re: [TowerTalk] compression PL259
>
>
>> Why has everyone suddenly started hating soldering UHF males?
>>
>> Rob
>> K5UJ
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>