If I understand correctly .....
I had a similar problem with the old CDE rotor of my father.
The problem was the brake.
The electromagnetic brake that recalls, was oxidized.
Cleaned up the device, is back to work.
Sorry for my English
73's de IZ1KGY - Carlo
> Message: 2
> Date: Wed, 9 Mar 2011 09:29:21 -0500
> From: "Glen" <k4kv@mds-ham.com>
> Subject: [TowerTalk] Emotator rotor motor problem
> To: "tower talk" <towertalk@contesting.com>
> Message-ID: <OLEMLLLENPOJJLABJGKJCEFOHAAA.k4kv@mds-ham.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hello,
>
> My Emotator 747 rotor motor now fails to turn right, but turns left just
> fine.
>
> I removed the rotor this morning and put it on the bench, same thing.
>
> Removed the top and bearing ring. Inside looks fine. Watched motor as I
> applied power LEFT
> and no problems. When applying power RIGHT, motor starts to move and
> makes
> a snap noise, as if
> it is internally jammed from moving that direction.
>
> I will check the current both ways, but expect RIGHT to be higher since
> there is a jam.
>
> Anyone have any experience with a DC rotor motor that will only turn one
> way????
>
>
> 73's
>
> Glen K4KV
> I suppose getting a replacement motor will not be fun :-(
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|