Mike
first check your invoice
if you order from Davis , thinking because you mention Bury Flex
The correct number for the CRIMP N MALE is this RFN-1006-3I , Clamp
RFN-1002-1SI
both use the bigger CENTER PIN
THE LAST LETTER IT HE MOST IMPORTANT
if you do not get those you will need to remove like 4 strands to make it fit
, will recommend return those and get the correct
J.Hector Garcia XE2K / AD6D
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
http://xe2k.net
________________________________
From: Mike <nf4l@nf4l.com>
To: towertalk reflector <towertalk@contesting.com>
Sent: Mon, April 11, 2011 10:34:53 AM
Subject: [TowerTalk] Crimp on Type N
What's the secret for getting the center pin of a crimp-on type N connector
onto
the
center conductor of Bury-Flex? Is it OK to clip a couple of strands?
73, Mike NF4L
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|