On 4/14/2011 8:41 AM, Steve K7AWB wrote:
> Chas
>
> I see you are using the Ham Radio Operator's official motto in your
> posting:
>
> "And all of this as cheap as possible."
>
>
> For my towers, I will be using metal Hoffman-type enclosures with rubber
> seals around the door, probably NEMA 3, 4, or 12. I have several I got from
> work before I retired. They will be mounted at the bottom, a few up from
> the pad.
>
Be sure to paint them and particularly the hinge and seal area. Then be
sure to lubricate the hinge and put a thin layer of either silicone
grease or Vaseline on the gasket. Both of these areas are highly prone
to rusting if additional protection is not taken.
73
Roger (K8RI)
> 73
> Steve Sala
> K7AWB
> DN17es
> Nine Mile Falls, WA
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|