Towertalk
[Top] [All Lists]

Re: [TowerTalk] grounding quesitons: Ufer, strap, exothermic welds

To: "Mat Eshpeter" <kk1c@live.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] grounding quesitons: Ufer, strap, exothermic welds
From: "Jim W7RY" <w7ry@inbox.com>
Reply-to: Jim W7RY <w7ry@inbox.com>
Date: Sun, 17 Apr 2011 07:58:27 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I would put some #2AWG tinned solid in the foundation and not rely on the 
rebar.

I have used a clamp type unit to clamp the copper strap to the ground rod.

If it's lightning your concerned with, I would not use strap. Stick with 
#2AWG tinned bare copper, copper clad rods and exothermic attachment.

73
Jim W7RY


--------------------------------------------------
From: "Mat Eshpeter" <kk1c@live.com>
Sent: Sunday, April 17, 2011 7:24 AM
To: <towertalk@contesting.com>
Subject: [TowerTalk] grounding quesitons: Ufer, strap, exothermic welds

>
> I am about to pour concrete for the base of my HDX589 tower. I am going to 
> go with a Ufer ground as well as the Polyphaser recommended eight 75' 
> radials with multiple ground rods (8' rods every 16'). Location is on top 
> of a 1600' ridge in WV and lightning is a very real concern. My QRZ web 
> page gives a feel for the location.
>
> To build the Ufer ground, I am thinking about connecting a single bare 2/0 
> stranded copper wire to the rebar. Questions:
> 1) is one enough?
> 2) how do I properly connect the copper to the rebar? Is exothermic weld 
> the only way? Any problem with dissimilar metals?
> 3) how should the copper exit the base slab - above grade or below grade?
>
> Also, seems that copper strap is the preferred ground material for 
> connecting rods together. Will 0.032" thick strap have significantly 
> better longevity than 0.022" strap? I am refering to the strap sold by 
> Georgia Copper.  Copper is expensive and I don't want to invest in copper 
> that won't add any value to my installation.
>
> Where can I find exothermic weld products to connect copper strap to 5/8" 
> copper clad ground rods? I am exhausted reading Harger, Erico, Terraweld 
> info, and can only find wire-to-ground rod products, no strap-to-rod 
> products.
>
> 73
> Mat
> KK1C
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1321 / Virus Database: 1500/3578 - Release Date: 04/16/11
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>