Towertalk
[Top] [All Lists]

Re: [TowerTalk] lm-354

To: Doug Dietz <dcdietz@chartermi.net>
Subject: Re: [TowerTalk] lm-354
From: Dan Hearn <n5ardxcc@gmail.com>
Date: Sun, 8 May 2011 13:44:58 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Doug: Quite a few people have solved that problem as follows.
1. Install a high quality WORM DRIVE manual winch.
2. Remove the handle and drive the shaft with a husky, variable speed,
reversible drill. There is information , with pictures, in the TT archive on
how to adapt the crank shaft to the drill.

73, Dan, N5AR

On Sun, May 8, 2011 at 12:13 PM, Doug Dietz <dcdietz@chartermi.net> wrote:

> I have a used tri-ex tower that I am wanting to motorize.  I think that I
> can get the parts from tash towers. Is this the best way or has someone done
> there own thing and how is that working? Any ideas Doug WD8Z
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>