Howdy, TowerTalkians --
The tower under discussion is Rohn 25G so my answer to tension the top
set of HPTG6700 to 670 pounds might be a little aggressive. It might be a
good idea to tension it like the 3/16" EHS at 400#. I don't think there'll
be enough slack at that less tension to be of any concern - and it'll
decrease the compression on the legs. Better to err on the conservative side
of
things. Doesn't sound like it'll ever fall down due to guy failure - hi.
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|