The Ohmite MOX-1-123004F resistors are permanently mounted. I did glop
Liquid Electrical Tape over them to help protect them from the elements.
I added solder lugs to the resistor leads and just attached them across the
feed on my rotatable (20/15/10M) dipole, and from the base of my 43-foot
vertical to ground (my matching network at the base does have DC continuity,
but sometimes I disconnect the matching network to make measurments with my
AA230). I have a 6-meter beam with a direct coax feed (gamma match) so I
just soldered the resistor from the coax center conductor to a nearby ground
lug.
Phil - AD5X
----------------
Are they permanently mounted? If so, how do you mount them? Are there
coax connectors with built-in taps?
Dick
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|