A Google search for Lexan specifications will return plenty of info.
Lexan is a GE brand name for polycarbonate material. There are a number of
manufacturers of the polycarbonate stuff today and readily available
through plastics supply companies.
Great stuff, just wish it was less expensive. I need a couple of 4ft square
by 1/2" thick pieces for a project and the best price I can find is around
$400, ouch!
73,
Gerald K5GW
In a message dated 5/18/2011 9:29:58 P.M. Central Daylight Time,
akozak@hourglass.com writes:
It's SABIC now. GE sold the Plastics business in 2007. The bulletproof
Lexan was made by the Structured Products Group in Mt. Vernon IN, where the
original Lexan resin plant was located.
Al
AB2ZY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gene Fuller
Sent: Wednesday, May 18, 2011 9:42 PM
To: Mickey Baker; dave arruzza
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Lexan - Element to mast plate
I use 1/8" clear lexan as spacers for linear loading and for the boom
feedline on my 7-60 MHz log periodic. It's been up for about 8 years now with
no problems.
If you want real engineering/technical info I suggest you contact GE.
Their Lexan labs used to be in western MA.
Gene / W2LU
----- Original Message -----
From: "Mickey Baker" <fishflorida@gmail.com>
To: "dave arruzza" <w1ctn@yahoo.com>
Cc: <towertalk@contesting.com>
Sent: Wednesday, May 18, 2011 7:21 PM
Subject: Re: [TowerTalk] Lexan - Element to mast plate
Hi, Dave,
The power of the sun over time is incredibly more powerful than a bullet.
UV degradation occurs to Lexan, degrading optical properties over time,
however I know of no studies concerning structural integrity due to UV
exposure, something that makes some acrylics brittle. Beware using dark
colors, or anything that could raise the temperature. Acrylics tend to
deteriorate with heat, and Lexan will be deformable at 100 degrees C -
heating is how they're shaped.
How hot will it be in the hottest day of the summer in the sunshine where
you live?
Why wouldn't you use fiberglass, steel or aluminum?
Best of luck whatever you do!
73,
Mickey N4MB
On Wed, May 18, 2011 at 12:28 PM, dave arruzza <w1ctn@yahoo.com> wrote:
> To all:
> I have a good supply of 1/2" bullet resistant Lexan.
>
> Would this material be suitable for a element to mast plate for a linear
> loaded shortened 40 meter rotary dipole?
>
> Element length is 24' per side and the element is constructed from 1-1/4"
> double walled aluminum for the first piece from the center of the dipole.
> Phillystrand truss from element midpoint to mast above the dipole center.
>
> 73
> Dave
> W1CTN
> Radio Ansonia
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Mickey Baker
Fort Lauderdale, FL
"Tell me, and I will listen. Show me, and I will understand. Involve me,
and
I will learn." Teton Lakota, American Indian Saying.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|