Towertalk
[Top] [All Lists]

Re: [TowerTalk] TB3 Bolts

To: "'Georgens, Tom'" <Tom.Georgens@netapp.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] TB3 Bolts
From: "Tim Duffy K3LR" <k3lr@k3lr.com>
Reply-to: k3lr@k3lr.com
Date: Fri, 12 Aug 2011 10:48:01 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hello Tom!

There are 4 bolts on the Rohn TB-3 that attach it to the top tower plate.

The galvanized bolts are 0.500" in diameter - the nuts are 0.750" and the
bolt head is 0.875". They are 1.5" long. The as drilled holes in the bearing
mount are 0.59375" in diameter.

The three horizontal bolts that secure the mast are 0.375" diameter.

73,
Tim K3LR

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Georgens, Tom
Sent: Friday, August 12, 2011 10:35 AM
To: towertalk@contesting.com
Subject: [TowerTalk] TB3 Bolts

Hello

 

Does anybody know the size of the bolts that connect a TB3 thrust
bearing to the top of the tower.

 

Thanks for your help

 

73, Tom W2SC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>