Thats awesome! What's the spacing and how are you feeding it? Split
driven with a beta? How about OWA?
Dino - KX6D
-------- Original Message --------
Subject: Re: [TowerTalk] 30 meter yagi
From: "Stan Stockton" <k5go@cycle-24.com>
Date: Thu, September 29, 2011 6:33 am
To: <Cqtestk4xs@aol.com>, <TOWERTALK@contesting.com>
Bill,
OD Wall Exposed Length Overall Length
.375 .058 32 36
.500 .058 32 36
.750 .116 68 72
1.000 .116 68 72
1.250 .116 68 72
1.500 .116 36 36
Half element lengths, .058 = single wall, .116 = double wall, uses
6063-T832 and is good for 89 MPH. Each element weighs 18.17 pounds.
Lengths shown would resonate well below 10 Mhz so the MPH rating of 89
MPH is very worst case.
The cost from Cycle-24.com would be $97.20 per element.
Stan, K5GO
> ----- Original Message -----
> From: <Cqtestk4xs@aol.com>
> To: <TOWERTALK@contesting.com>
> Sent: Thursday, September 29, 2011 8:13 AM
> Subject: [TowerTalk] 30 meter yagi
>
>> Looking for plans to build a 3 el Yagi for 30 meters...nothing
>> fancy. I don't need one engineered for 150 MPH, but don't want to have it
>> look like spaghetti at 50 MPH.
>>
>> Any ideas?
>>
>> Bill KH7XS/K4XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|