Yes, it is the standard tilt base that Rohn sells. There is no tree to work
with and the roof line is only about 12-15 feet up. Some suggested pushing
it most of the way up with a Lull as seen here:
http://www.youtube.com/watch?v=wdrmgpp08Xs
I believe that will be the way to go.
Thanks and 73,
Joe kk0sd
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Wilson Lamb
Sent: Tuesday, October 11, 2011 7:43 AM
To: towertalk@contesting.com
Subject: [TowerTalk] HDBX-48 Tilt Up
Can you use a lift point in a tree or on your roof? As long as you can get
high enough to get started off the ground, you should be OK.
A few people and a ladder can likely push it up a ways, making the initial
load less.
I'm assuming you have some sort of tilt base?? Tell us more.
Wilson
W4BOH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|