Steve,
You can suck it through with a shop vac and a lightweight object like
a cork or piece of styrofoam on the end of the twine.
Stan, K5GO
Sent from Stan's IPhone
On Oct 24, 2011, at 10:51 AM, "Steve Jones" <n6sj@earthlink.net> wrote:
> I'm about to place a number of 150' Sched 40 PVC conduits between my
> shack
> and new tower. I want to end up with small 200 lb. stength nylon
> twine in
> each conduit, then use that small twine to pull through a larger
> 1/4" nylon
> rope for the actual cable pulls.
>
> Should I use a fish tape to pull through the small twine as I glue
> on each
> additional section of conduit? I'm concerned about the PVC cement
> sticking
> to the nylon twine. Or is there an easy way to install the small
> twine
> after a whole 150' run of conduit is completely glued together?
>
> 73,
>
> Steve
> N6SJ
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|