Towertalk
[Top] [All Lists]

Re: [TowerTalk] QSL card in the hole before the concrete pour

To: "'Towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] QSL card in the hole before the concrete pour
From: "Jim Chaggaris" <jimc@pwrone.com>
Reply-to: jimc@pwrone.com
Date: Mon, 31 Oct 2011 20:23:26 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you have a P5 card, just toss it in...

Best Regards,

Jim

James Chaggaris
President
PowerOne Corp./PowerOne Environmental
1020 Cedar Avenue
Suite 203
St. Charles, IL 60174
Phn: 630-443-6500
Fax: 630-443-6505
Cell: 630-669-2241
website: www.pwrone.com


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Richard Thorne
Sent: Monday, October 31, 2011 5:44 PM
To: Towertalk
Subject: [TowerTalk] QSL card in the hole before the concrete pour

Well my concrete guy solve my problem of going square or round on the 
base of the tower, he made it square, and over sized at that.  He's 
going 4' square by 4' deep, that should hold up some tower.

I also moved my guy points out a bit.  Its an 80' tower and I had the 
guy points at 65' originally, I moved them out to 80' so it will give me 
more room to stack antennas between the 40' and 80' levels.

Now for the more important question.  If I remember correctly, I'm 
supposed to sacrifice a prized qsl card by throwing it in the bottom of 
the hole prior to the pour, correct?

Rich - N5ZC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>