Towertalk
[Top] [All Lists]

Re: [TowerTalk] PIPE ANCHORS

To: towertalk@contesting.com
Subject: Re: [TowerTalk] PIPE ANCHORS
From: Dick NY1E <dickny1e@yahoo.com>
Date: Tue, 1 Nov 2011 17:34:31 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes, concrete is strong in compression, but think about a pipe full of
> concrete and bending.  It stretches on the far side, and the concrete
> just cracks.  Concrete isn't very strong in bending.
>
> Overall, I don't think concrete fill buys you a lot, structurally,
> unless you're doing something like a prestressed concrete beam, so the
> side away from the load doesn't ever get into tension.
>
> Even in the compression side, the steel probably is stronger than the
> concrete in compression.  Concrete's big advantage is that it's cheap
> compared to steel.

I know, on a smaller scale, I had a problem of bending 2 sets of high 
(apehangers) handlebars on a motorcycle, when I filed the third with cement, 
they never bent again....

Dick NY1E
www.ny1e.com  (with pics of the handlebars)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>