Kano Kroil 'the oil that creeps' is the absolute champ at loosening .. 73
de n7wb
On Sun, Nov 13, 2011 at 9:41 PM, K8RI <K8RI-on-TowerTalk@tm.net> wrote:
> On 11/13/2011 8:37 PM, Jim Hargrave wrote:
> > John,
> >
> > I have been successful in removing bolts from aluminum housings with an
> air
> > or electrical impact wrench. Just apply some penetrating oil and let it
>
> Use a good penetrating oil such as Mouse Milk or PB Blaster. They really
> are superior. They've gotten things apart that
> many of the others didn't touch.
>
> Let PB blaster soak over night and they usually come right out. It's
> unlikely the SS has galled in Aluminum. It's more likely there some
> Aluminum Oxide swollen up in there preventing the bolt from coming out.
>
> 73
>
> Roger (K8RI)
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|