I have a soft copy and will send it directly to your email.
Mike K9MK
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Brown
Sent: Monday, November 28, 2011 11:41 AM
To: towertalk@contesting.com
Subject: [TowerTalk] KLM 13-El 2M Beam - Need Documentation
One of the guys in our local ham club has given me this beam with a
design that suggests that it was made by KLM. There are two driven
elements made of tubing, with a crossover between them and a short
length of coiled teflon coax as a phasing line. The remaining elements
are small diameter solid aluminum mounted with feed-thrus to the 22-foot
boom, which appears to be about 1-inch to 1-1/4 inches. The antenna is
in excellent shape.
I'm planning to use it for weak signal work on the lower 500 kHz of the
band. I'd like to know its specs, and what, if anything, I need to do
to optimize it for that end of the band.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|