Towertalk
[Top] [All Lists]

[TowerTalk] Dipole fed with balanced line?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Dipole fed with balanced line?
From: "Jim Miller Waco Texas WB5OXQ" <wb5oxq_1@grandecom.net>
Date: Sun, 15 Jan 2012 18:31:20 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I must move my 40 and 75 dipoles due to rfi in the house that I cannot resolve. 
 I am thinking about 1 dipole fed with ladder line or window line.  I have 2 
possable support points.
1 pair is 126' from end to end and 50' high at one end and 30' at the other.  
Second pair 139' apart but 25' at one end and 30' at the other.  The longer but 
lower is farther from the house by about 10' and runs over level yard with no 
obstructions.    What is up with the 130' dipole fed with balanced line?   Is 
this better for a multiband antenna than using 1/2 wave at the lowest desired 
freq?  I have a MT-3000A Dentron tuner which is supposed to work with ballanced 
line.  The maximum power I run is 800 watts rms not pep.
Suggestions please.  I have never used a dipole fed with balanced line.  Will 
the window line take 800 watts or should I get the open wire feeder?  I really 
only need this antenna to work on 75 and 40.  I use my triband beam for 20+.  
How do you bring this line into the shack?  Obviously it cannot touch anything 
metal along its run.  Is the length of the feeder critical?
Should the wire be long as possable or 1/2 wave at the lowest desired 
frequency?  (3.9mhz)
wb5oxq
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>