This is a follow up to my post asking for feedback on spacing a WARC beam above
a tribander.
First let me thank you guys that have responded with your experience in this.
Your input is very much
appreciated. To refresh, my query was to find the optimum space to leave
between my Force 12 C3 tribander
and a Force 12 2/2 WARC beam mounted higher on the mast to minimize
interaction between them.
After learning about actual install results from you guys I called Force 12 and
asked for their inout on this.
They said this is a frequent question they receive. Below is a chart they
provided showing a C-19XR and WARC 2/2
at various spacings from 7 feet to 16 feet. They said I will get similar
results with my C3 and the WARC 2/2 because
the C31 is an expanded design of the basic C3. Take a look at the numbers.
Its interesting to note that at 8 feet spacing
the C31 gain actually goes up by .5 DB on 15 meters ! Their recommended space
is 8 feet. The feedline impedance
stays close to normal and a nice .5db gain on 15mtrs.
Thanks guys for the feedback on this.
Here is the Force 12 Chart
73,
Bob
K6UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|