Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mosley TA-33jr

To: 'Gary Joe Mayfield' <gary_mayfield@hotmail.com>, towertalk@contesting.com, k3lr@k3lr.com
Subject: Re: [TowerTalk] Mosley TA-33jr
From: Tom Anderson <andersonww5l@sbcglobal.net>
Date: Fri, 27 Apr 2012 09:11:43 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Joe:  You will enjoy the TA33jr.  It was my first beam back in the 80s and I 
worked more than 250 countries with it and a Yaesu FL2100B amp and a TS830s and 
a TS430S.  Finally traded it for a Mosley Classic 33WARC with the 40m kit and 
later traded that for a Tennadyne T-10 LPDA.
Now if I can just work a BS7H (that counts, the first DXpedition doesn't) P5, 
and EP I'll have them all.


Tom, WW5L

--- On Wed, 4/25/12, Tim Duffy K3LR <k3lr@k3lr.com> wrote:

> From: Tim Duffy K3LR <k3lr@k3lr.com>
> Subject: Re: [TowerTalk] Mosley TA-33jr
> To: "'Gary "Joe" Mayfield'" <gary_mayfield@hotmail.com>, 
> towertalk@contesting.com
> Date: Wednesday, April 25, 2012, 10:13 PM
> Hello Joe!
> 
> The TA33JR was my very first Yagi antenna back in 1973. It
> works very well
> for its size.
> 
> The #41 blocks are metal (for the director and reflector
> mount). The #44
> block is black plastic (for the driven element mount).
> 
> Good luck with your TA33JR rebuild project. You will have
> lots of fun with
> that antenna!
> 
> 73,
> Tim K3LR
> 
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]
> On Behalf Of Gary "Joe" Mayfield
> Sent: Wednesday, April 25, 2012 10:08 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Mosley TA-33jr
> 
> I am rebuilding the club's TA-33jr (I know there are better
> antennas, but it
> serves the purpose). 
> 
>  
> 
> I have a couple of quick questions someone on the list will
> know.
> 
>  
> 
> 1.       Are the "element clamping
> blocks No. 41" that hold the director and
> reflector to the boom made of metal or plastic?
> 
>  
> 
> 2.       How about the "element
> clamping blocks No. 44" that hold the
> mounting plate to the mast?
> 
>  
> 
> Thanks and 73,
> 
> Joe kk0sd
> 
>  
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>